Main Content

Flux Gel

Warton manufacture a range of cleaners to suit all applications.

To request a datasheet, or if you require further information please contact us.

Availability options

Product Description Halide Content Specification Availability
nexus
NXG-909 Rework Gel
A halide free and halogen free, clear residue rework gel for the rework of SMT devices and conventional through hole devices. Developed for excellent performance on all Lead-Free finishes. Exceeds the requirements of J-STD-004B type ROL0 Halide Free
Halogen Free
ROL0
J-STD-004B
10grm, 30grm syringes
(automatic / manual)
50g, 100g, 250g, 500g, 1kg tubs
0.3Kg Cart (12oz)

Can be used as supplied, or with needles/tips for easy application.
future
Future HF Rework Gel
A halide free, clear residue rework gel for the rework of SMT devices and conventional through hole devices. Exceeds the requirements of J-STD-004 ROL0 Halide Free ROL0
J-STD-004
10grm, 30grm syringes
(automatic / manual)
50g, 100g, 250g, 500g, 1kg tubs
0.3Kg Cart (12oz)

Can be used as supplied, or with needles/tips for easy application.
future
Future HD Rework Gel
A similar product to the Future HF rework gel but with slight halide activation. < 0.5% ROL1
J-STD-004
10grm, 30grm syringes
(automatic / manual)
50g, 100g, 250g, 500g, 1kg tubs
0.3Kg Cart (12oz)

Can be used as supplied, or with needles/tips for easy application.
Brown Flux Jelly
Brown flux jelly is suitable for electrical and electronics assembly. Based on conventional pine resin, brown flux jelly leaves an amber, no clean residue which can be removed using Warton Total Clean and Surf Clean range of solvent and water based saponification cleaners. < 0.5% ROL1
J-STD-004
50g, 100g, 250g, 500g, 1Kg tubs

Warton offer a range of needles and tips to go with their syringe flux gels.

Needles & Tips
E/ST Series

The E and ST range of needles are made from rigid stainless steel with a blunt end and plastic hub. They are typically used for application of medium viscosity materials such as epoxies.

Part No. Gauge I.D. Colour
E14-1/2 14 0.063 in / 1.60mm Dark Green
E15-1/2 15 0.054 in / 1.37mm Orange
ST18-1/2 * 18 0.033 in / 0.84mm Pink
ST19-1/2 * 19 0.027 in / 0.69mm Brown
ST20-1/2 * 20 0.023 in / 0.58mm Yellow
ST21-1/2 * 21 0.020 in / 0.51mm Green
ST22-1/2 * 22 0.016 in / 0.41mm Black
ST23-1/2 * 23 0.013 in / 0.33mm Light Blue
ST25-1/2 * 25 0.010 in / 0.25mm Dark Blue
ST26-1/2 * 26 0.009 in / 0.23mm Beige
ST27-5/16 * 27 0.008 in / 0.20mm Grey
ST30-5/16 * 30 0.006 in / 0.15mm Lavender

* Also available in 1" (25mm) length. Standard length is ½" (12mm)

TT Series Maximum Flow Tips

The TT Taper Tip range are produced from moulded polyethylene and are typically used for higher viscosity materials such as greases or RTV silicones.

Part No. Gauge I.D. Colour
TT14 14 0.063 in / 1.60mm Tan
TT16 16 0.047 in / 1.19mm Grey
TT18 18 0.033 in / 0.84mm Green
TT20 20 0.023 in / 0.58mm Pink
TT22 22 0.016 in / 0.41mm Blue

All TT tips are 1¼" (31mm) long

CTLL Series Flexible Polyethylene Tips

The CTLL range are moulded in clear polyethylene and recommended for low viscosity applications such as oils or cyanoacrylate adhesives.

Part No. Gauge I.D. Colour
CT16LL 16 0.047 in / 1.19mm Grey
CT18LL 18 0.033 in / 0.84mm Green
CT20LL 20 0.023 in / 0.58mm Pink
CT22LL 22 0.016 in / 0.41mm Blue

All CT tips are 1½" (37mm) long

The Company warrants only that the Goods will correspond as to the quality and description with the Company’s own specifications as set out in each product data sheet and all other terms conditions or warranties relating to the quality and/ or fitness for any particular purpose whether express or implied are excluded to the fullest extent permitted by law. It is therefore the Buyers responsibility to satisfy itself by inspection and testing of samples prior to placing any orders as to the purpose for which he requires the Goods and or particular conditions of use that will apply to the Goods and or the suitability or performance of the Goods when used in combination with any other Goods or materials, in any specific environment and in any process. In no event shall the Company be responsible for special, incidental or consequential damages, whether the claim is in contract, negligence or otherwise.