Solrist Solder Spot Resist
Solrist Peelable Spot Resist is a temporary
solder resist designed to be applied on areas of printed circuit
assemblies which require components to be added after wave
soldering. A thin layer of Solrist is applied over holes and
easily removed after drying through the soldering process.
Solrist is non staining and is available in viscosity’s suitable
for both manual and automated dispensing.
Solrist
Formulations
Formulation |
Application
method |
Viscosity
Brookfield 5rpm |
Solrist
50 |
Hand Application |
50,000
cP’s ± 10% |
Solrist
100 |
Hand /
Auto Dispense |
100,000
cP’s ± 10% |
Solrist
Process
The following
process chart shows the order in which Solrist Solder Spot
Resist should be applied.
| Step
1 |
PCB |
| Step
2 |
Apply
Solrist Solder Spot Resist |
| Step
3 |
Apply
Liquid Flux |
| Step
4 |
Preheat |
| Step
5 |
Solder
with Warton High Purity Bar Solder |
| Step
6 |
Peel Off Solrist
coating |
| Step
7 |
Touch up and
add missing components with Warton High Purity Cored
Solder |
Packaging
Solrist is available in 250ml
squeeze bottle with nozzle applicator.
The Company warrants only that the Goods will correspond as to the quality and description with the Company’s own specifications as set out in each product data sheet and all other terms conditions or warranties relating to the quality and/ or fitness for any particular purpose whether express or implied are excluded to the fullest extent permitted by law. It is therefore the Buyers responsibility to satisfy itself by inspection and testing of samples prior to placing any orders as to the purpose for which he requires the Goods and or particular conditions of use that will apply to the Goods and or the suitability or performance of the Goods when used in combination with any other Goods or materials, in any specific environment and in any process. In no event shall the Company be responsible for special, incidental or consequential damages, whether the claim is in contract, negligence or otherwise.
