Other Products
Solrist Solder Spot Resist
Solrist Peelable Spot Resist is a temporary solder resist designed to be applied on areas of printed circuit assemblies which require components to be added after wave soldering. A thin layer of Solrist is applied over holes and easily removed after drying through the soldering process. Solrist is non staining and is available in viscosity's suitable for both manual and automated dispensing.
Kapton Tape & Dots
Kapton ® is a registered Trade Mark of DuPont ™
Kapton ® Tape and Dots are based on Dupont "Kapton ®" film. Kapton ® is a registered Trade Mark of DuPont ™". Kapton ® is backed with a clear silicone pressure sensitive adhesive and has been successfully used at temperatures up to 400° C and only begins to char at 800° C. These properties result in a tape with remarkable dimensional stability and excellent electrical and physical properties over a wide range of temperatures (-8° C to +370 ° C).
De-solder Wicks
De-solder Wicks or solder braid as it is otherwise known, is made with tiny braided copper wire strands and is used for the removal of solder from the circuit board during the repair operation.
Flux Pens
Warton Manufacture a range of flux pens containing rosin based and VOC free fluxes. Flux pens allow the controlled application of flux, eliminating the mess created when using flux bottles. Flux pens not only stop waste but also eliminate operator exposure to soldering chemicals.
Rework Gel
A homogenous flux jelly widely used for rework of SMT devices and conventional through hole devices. Future HF Rework Jelly exceeds the requirements of J-STD-004 ROL0.
Future HF Rework Jelly is a homogenous flux jelly widely used for the rework of SMT devices and conventional through hole devices. Future HF Rework jelly exceeds the requirements of J-STD-004 ROL0.
- Halide Free
- Exceeds the requirements of J-STD-004 ROL0
- Clear residue
- Can be used as supplied, or with needle/ tips for easy application.
Brown Flux Jelly
Warton Metals Brown Flux Jelly (otherwise known as red flux jelly) is suitable for electrical and general purpose solder work, jointing commonly encountered metals.
- Non Corrosive Jelly based soldering flux
- Flux residue can be removed using the solvent cleaner
- Manufactured in the UK by Warton Metals
The Company warrants only that the Goods will correspond as to the quality and description with the Company’s own specifications as set out in each product data sheet and all other terms conditions or warranties relating to the quality and/ or fitness for any particular purpose whether express or implied are excluded to the fullest extent permitted by law. It is therefore the Buyers responsibility to satisfy itself by inspection and testing of samples prior to placing any orders as to the purpose for which he requires the Goods and or particular conditions of use that will apply to the Goods and or the suitability or performance of the Goods when used in combination with any other Goods or materials, in any specific environment and in any process. In no event shall the Company be responsible for special, incidental or consequential damages, whether the claim is in contract, negligence or otherwise.
