Click
on image to see larger version
The
E and ST range of needles are made from rigid stainless
steel with a blunt end and plastic hub. They are typically
used for application of medium viscosity materials such as
epoxies.
| Part
No. |
Gauge |
I.D.
(Inches) |
I.D.
(mm) |
Colour |
| E14-1/2 |
14 |
0.063 |
1.60 |
Dk
Green |
| E15-1/2 |
15 |
0.054 |
1.37 |
Orange |
| ST18-1/2* |
18 |
0.033 |
0.84 |
Pink |
| ST19-1/2* |
19 |
0.027 |
0.69 |
Brown |
| ST20-1/2* |
20 |
0.023 |
0.58 |
Yellow |
| ST21-1/2* |
21 |
0.020 |
0.51 |
Green |
| ST22-1/2* |
22 |
0.016 |
0.41 |
Black |
| ST23-1/2* |
23 |
0.013 |
0.33 |
Lt.
Blue |
| ST25-1/2* |
25 |
0.010 |
0.25 |
Dk.
Blue |
| ST26-1/2* |
26 |
0.009 |
0.23 |
Beige |
| ST27-5/16* |
27 |
0.008 |
0.20 |
Grey |
| ST30-5/16* |
30 |
0.006 |
0.15 |
Lavender |
* Also
available in 1" (25mm) length. Standard length is ½"
(12mm)
TT
Series Maximum Flow Tips
The TT
Taper Tip range are produced from moulded polyethylene and
are typically used for higher viscosity materials such as
greases or RTV silicones.
Click on image to see enlarged version
| Part
No. |
Gauge |
I.D.
(inches) |
I.D.
(mm) |
Colour |
| TT14 |
14 |
0.063 |
1.60 |
Tan |
| TT16 |
16 |
0.047 |
1.19 |
Grey |
| TT18 |
18 |
0.033 |
0.84 |
Green |
| TT20 |
20 |
0.023 |
0.58 |
Pink |
| TT22 |
22 |
0.016 |
0.41 |
Blue |
All TT
tips are 1¼" (31mm) long.
CTLL
Series Flexible Polyethylene Tips
The CTLL
range are moulded in clear polyethylene and recommended for
low viscosity applications such as oils or cyanoacrylate adhesives.
| Part
No. |
Gauge |
I.D
(inches) |
I.D
(mm) |
Colour |
| CT16LL |
16 |
0.047 |
1.19 |
Grey |
| CT18LL |
18 |
0.033 |
0.84 |
Green |
| CT20LL |
20 |
0.023 |
0.58 |
Pink |
| CT22LL |
22 |
0.016 |
0.41 |
Blue |
All CT
tips are 1½" (37mm) long.
Click on image to see enlarged version
