Kapton, Kapton Tape and Dots supplied by Warton Metals - UK manufacturers of solder, fluxes and soldering materials Home
Lead Free SoldersCored Solder WireSolid Solder WiresFluxes
Bar SolderRosin FreeSolder PasteAncillary & Other Products

Leading UK manufacturer & supplier of Kapton Tapes & Dots, Solder Paste, Solid & Cored Solder
Wires, Lead Free & Rosin Free Solders, Fluxes, Cleaners and High Purity Bar Solder Products



SEARCH CATALOGUE
WARTON SEARCH

 

Kapton Tape & Dots



Kapton Tape & Dots

Kapton Ò is a registered Trade Mark of DuPont Ô

KaptonÒ Tape and Dots are based on Dupont Ô "Kapton Ò” film. Kapton Ò is backed with a  clear silicone pressure sensitive adhesive and has been successfully used at temperatures up to 400° C and only begins to char at 800° C.  These properties result in a tape with remarkable dimensional stability and excellent electrical and physical properties over a wide range of temperatures (-8° C to +370 ° C).

Application

Adhesive KaptonÒ tape is an insulation tape for extreme temperatures, with excellent resistance to thermal radiation. This makes it ideal for masking Gold edge fingers and edge connectors during soldering and reflow soldering processes within the PCB assembly industry.

Availability

KaptonÒ Tape is available in 3, 6, 9, 12, 19 and 25mm width rolls (Other sizes may be available). Each roll is 33 metres long. KaptonÒ Dots are available in 4, 6, 9 and 12mm diameter and supplied per 1000 dots.

Physical Properties

Adhesive Type: Silicone
Backing Thickness (mm): 0.025
Total Thickness (mm): 0,065
Peel Strength (N/cm): 2.2
Tensile Strength (N/cm): 53 N/10mm
Elongation (%): 50
Temperature Range: Continuous 180 short periods up to 370°

Chemical Properties

PH value of aqueous extract: 4.0 - 6.0
Freedom from corrosive sulphur: No stain on copper

Chemical & Solvent Resistance

Bacteria & Fungi: Excellent
Water: Excellent
Salt water: Excellent
Acids: Excellent

Resistant to most alcohols, esters, and oils, but not to Aliphatic & Aromatic Hydrocarbons.

Storage &Application

Storage: The conditions under which this product is stored may affect its performance. Storage should be in dry, well ventilated rooms with a constitute temperature of around 20° C and should be protected from continuous exposure to direct sunlight.
Method of Application: The product should always be applied to clean, dry, surfaces.

Kapton Ò is a registered Trade Mark of DuPont Ô

Click here to shop for Kapton Tapes & Dots now >


ISOQAR and UKAS Certification Future Autosol High Speed Cored Solder Wire  for automated and high speed soldering Ecowave Wave Soldering Flux Omega Rosin Free ProductsMicroprint Slump Free No Clean  Solder Paste Total Clean CFC Free Cleaning Solution

About Us | Contact Us | Feedback | Become a Distributor