Ecowave
Solder Fluxes
A
range of low solids, no clean wave solder fluxes including
Warton's low temperature VOC Free flux, which exhibits no
solder balling, skips or bridging, even with a preheat temperature
as low as 80ºC (176°F - topside board temperature). The
Ecowave low temperature activation system is available in
traditional alcohol formulations and low rosin content
type fluxes. Ecowave low activation system maintains
the maximum of heat stability, for all wave soldering operations,
for dual wave, single wave, conventional and SMT applications.
Ecowave
VOC Free formulations offer the maximum performance on conventional
Sn63 (63/37) and Lead Free alloys Sn96 and Lead Free TSC
alloy (Sn/Ag/Cu) - allowing ease of technology change.
A
VOC Free No Clean wave soldering flux, offering absolute
cleanliness and soldering performance with both lead based
and lead free alloys. Ecowave 45 exhibits no solder
balling even with a topside board temperature as low as
80°C (176°F) (dedicated spray formulation). Ecowave
45 is suitable for use with most types of wave soldering
equipment and circuit technology.
Datasheet
EC45.PDF
Ecowave
44 No Clean Wave Solder Flux
A
2.5% solids, reduced VOC content, low solids flux suitable
for use with Sn63 (63/37) for both conventional and
SMT applications.
Datasheet
EC44.PDF
Ecowave
42 No Clean Wave Soldering Flux
A
2.5% solids, low solids flux suitable for use with Sn63 (63/37)
for both conventional and SMT applications.
Datasheet
EC42.PDF
Ecowave
33 No Clean Wave Soldering Flux
A
2.5% solids, no clean flux for use on conventional and SMT
applications. Ecowave 33 offers improved wetting and
heat stability for Sn63 (63/37) operations.
Datasheet
EC33.PDF
Ecowave
23 No Clean Wave Soldering Flux
A
2% rosin content, no clean flux optimised for Sn63 (63/37)
operations using Soltec and Electrovert Dual Wave Soldering
Equipment. Ecowave 23 offers improved through hole and
SMT wetting, whilst offering the minimum of post soldering
residues.
Datasheet EC23.PDF
Ecowave
42B Low Solids Flux
Ecowave
42B is a low residue, no clean flux with 1.7% solids, colophony
and halide free and suitable for most no clean soldering applications.
Datasheet 42B.PDF
Ecowave
43 Low Residue No Clean Flux
Ecowave
43 is a Low Residue, No Clean Flux for superior wetting. A
4% solids, colophony and halide free flux suitable for lead
free.
Datasheet 43.PDF
Packaging
Ecowave
fluxes are supplied in 5, 10, 25 and 205 Litre containers,
(smaller sized containers 125cc, 0.5 Litre and 1 Litre are
available on request).
