Solrist
Solder Spot Resist
Solrist
Peelable Spot Resist is a temporary solder resist designed
to be applied on areas of printed circuit assemblies which
require components to be added after wave soldering. A thin
layer of Solrist is applied over holes and easily removed
after drying through the soldering process. Solrist is non
staining and is available in viscosity's suitable for both
manual and automated dispensing.
Kapton
Tape & Dots
Kapton
® is a registered Trade
Mark of DuPont ™
Kapton
® Tape and Dots are based on Dupont "Kapton
®" film. Kapton ®
is a registered Trade Mark of DuPont ™".
Kapton ® is backed with
a clear silicone pressure sensitive adhesive and has been
successfully used at temperatures up to 400° C and only
begins to char at 800° C. These properties result in
a tape with remarkable dimensional stability and excellent
electrical and physical properties over a wide range of
temperatures (-8° C to +370 ° C).
De-solder
Wicks
De-solder
Wicks or solder braid as it is otherwise known, is made
with tiny braided copper wire strands and is used for the
removal of solder from the circuit board during the repair
operation.
Flux
Pens
Warton
Manufacture a range of flux pens containing rosin based
and VOC free fluxes.
Flux
pens allow the controlled application of flux, eliminating
the mess created when using flux bottles. Flux pens not
only stop waste but also eliminate operator exposure to
soldering chemicals.
Rework
Gel
A homogenous
flux jelly widely used for rework of SMT devices and conventional
through hole devices. Future HF Rework Jelly exceeds the
requirements of J-STD-004 ROL0.
Future HF Rework Jelly is a homogenous flux jelly widely
used for the rework of SMT devices and conventional through
hole devices. Future HF Rework jelly exceeds the requirements
of J-STD-004 ROL0.
- Halide
Free
- Exceeds
the requirements of J-STD-004 ROL0
- Clear
residue
- Can
be used as supplied, or with needle/ tips for easy application.
Brown
Flux Jelly
Warton
Metals Brown Flux Jelly (otherwise known as red flux jelly)
is suitable for electrical and general purpose solder work,
jointing commonly encountered metals.
- Non
Corrosive Jelly based soldering flux
- Flux
residue can be removed using the solvent cleaner
- Manufactured
in the UK by Warton Metals
